Frequently Asked Questions

Would you like to learn more about a specific topic? In our FAQ section, you will find useful information about EPOSA and the technologies used.

FAQ - Frequently Asked Questions

Is it possible to work with EPOSA outside of Austrian territory?

Yes, that is possible. Due to the size and extent of the EPOSA reference station network, the correction data can also be used beyond Austria’s borders. A distance of up to approximately 30 kilometers from the national border is realistic. Within this range, a fixed solution with centimeter-level accuracy can be achieved. Please note that different coordinate reference systems apply in neighboring countries. Before conducting measurements, verify which reference system is required for the results.

Click here to download the overview map

Is it possible to take measurements in a forest using GNSS?

Positioning in forested areas is possible using EPOSA correction data. In a deciduous forest, good results can be achieved with modern geodetic receivers. Centimeter-level accuracy is attainable.

In coniferous forests, the results are significantly worse, as the trees' needles cause strong shielding of the satellite signals.

Which GNSS receivers are supported?

Products from any manufacturer can utilize EPOSA correction data, provided they are capable of processing the following standardized interfaces and data formats:

NMEA-0183 for transmitting the receiver's position to the EPOSA server

RTCM 3.X for receiving correction data

NTRIP protocol

Single-frequency and multi-frequency receivers are supported.

Surveying equipment (rovers) is supported.

Integrated solutions, such as those used in machine control systems (for tractors, excavators, snow groomers, etc.), are supported.

Which SIM cards are supported?

Data SIM cards from any provider in Austria or other EU countries can be used. Prepaid cards are also an option; in such cases, please ensure there is sufficient credit available before use.

For most applications, the smallest data packages offered by providers are more than enough to cover the data requirements of EPOSA.

How can I apply for an EPOSA license?

Complete the application for use of the EPOSA positioning services in the Download area and send it to:

info@eposa.at

Access will be set up on the same or the next business day. Your login credentials will be sent to you via email. From that point on, your EPOSA access will be activated.

How many satellites are required for a position solution with centimeter-level accuracy?

In theory, four satellites are sufficient to determine a position.

In practice, at least 6 satellites are required to obtain a reliable position solution within a reasonable response time. The greater the number of satellites, the more reliable and rapid the position determination becomes.

The better the satellites are distributed across the horizon, the more favorable the PDOP (Position Dilution of Precision) and the resulting position estimate.

What does FIXED mean?

In English, the word "FIXED" means secured or firm.

In the context of RTK (Real-Time Kinematic) measurements, "FIXED" indicates that a fully calculated, stable solution has been obtained. All ambiguities in the satellite signals have been completely resolved.

In contrast, "FLOAT" signifies that the position solution has not yet been fully calculated or stabilized.

What is a PDOP?

In satellite navigation systems, position is determined by calculating the distances to several satellites through signal propagation time measurements. The accuracy of this positioning depends on the relative positions of the satellites with respect to each other and to the location being observed, as well as on the precision of the time or propagation time measurement. An angle of 90° between a satellite (A), the receiver's location, and another satellite (B) is considered optimal. If these angles are very small or close to 180°, the circles or spheres representing the distances intersectOpens in a new tab at shallow anglesOpens in a new tab, which reduces measurement accuracyOpens in a new tab. The reciprocal of the area or volume spanned by the unit vectors pointing toward the satellites determines the magnitude of the DOP.

For a given satellite constellation at a specific location, DOP is a measure of how well-suited that constellation is for taking measurements. A value of one represents the best possible geometric arrangement of the satellites, while a value of approximately 6 is still considered good. DOP values ​​greater than 10 render any evaluation impossible.

The best possible value is 1.0. Values ​​less than 1.0 indicate that the equation system is overdetermined—that is, there are more equations than unknowns.

The following DOP values ​​are distinguished:

VDOP Vertical DOP Vertical direction 1D

HDOP Horizontal DOP Horizontal direction 2D

PDOP Positional DOP Positional accuracy 3D

TDOP Time DOP Temporal accuracy Time

GDOP Geometric DOP Overall accuracy 3D and time

DOP values ​​are frequently provided by GPS receivers within the NMEA GSA data sentence, in fields 15, 16, and 17.

Source: WikiPedia - Dilution of PrecisionOpens in a new tab

What does NTRIP mean?

Networked Transport of RTCM via Internet Protocol (Ntrip) is a method—now standardized by the Radio Technical Commission for Maritime Services (RTCM)—for distributing Differential GPS (DGPS) data over the Internet. Ntrip was released in September 2004 as the "RTCM Recommended Standards for Networked Transport of RTCM via Internet Protocol (Ntrip), Version 1.0." Although originally intended solely as a means to transport RTCM (a DGPS format), the protocol is now used for a wide variety of navigation-related data.

Ntrip is based on the Hypertext Transfer Protocol (HTTP/1.1), which allows for relatively easy use even within highly restrictive network segments (such as intranets or behind firewalls). The simplicity of the protocol and the public availability of its source code have led to its widespread adoption. Ntrip was developed by the German Federal Agency for Cartography and Geodesy (BKG, Frankfurt am Main) and the Informatik Centrum Dortmund.

What is a mount point?

For the delivery of correction data in the NTRIP format, so-called "mountpoints" are defined using an IP address and a designated port. Through these mountpoints, the GNSS user receives correction data updated every second to achieve precise positioning.

Mountpoint = Access node

What does the TÜV certification of EPOSA signify?

The EPOSA services and the EPOSA reference station network were certified by the certification body NAVCert GmbH in 2018, 2019, 2020, 2021, 2022, and 2023 in accordance with the PPP80013-C guideline. This guideline is based on the ISO 17123-8 standard.

The evaluation criteria include:

  • Availability of the services and the network – which exceeds 99%
  • Positioning accuracy – 2 cm
  • Quality and reliability of customer support – high service quality has been confirmed

What level of accuracy can be achieved with EPOSA?

The achievable accuracy depends on the GNSS device, the selected mountpoint, and the environment in which the position is determined.

Using high-quality receivers capable of tracking all four satellite systems—and at least two frequencies from each—along with a 1-second interval for the transmission of correction data and an unobstructed view of the satellites, a horizontal accuracy (X, Y, or longitude/latitude) of 2 cm can be achieved.

For vehicles, an accuracy of better than 10 cm can be attained at speeds of up to 50 km/h.

At speeds of approximately 200 km/h, the achievable accuracy is around 70 cm.

Through post-processing (offline analysis), and provided that raw data is recorded at 1-second intervals over a duration of 24 hours, a horizontal accuracy of 1–3 mm can be achieved.

What do I need in order to use EPOSA?

A GNSS receiver capable of receiving and processing satellite signals (e.g., GPS, GLONASS, GALILEO, BEIDOU). An internet connection from the GNSS receiver (via a laptop, modem, or mobile phone) to the EPOSA server (ntrip.eposa.at), and an EPOSA license (username/password).

You can apply for an EPOSA license using the registration form. You can find this in the Download area.

How much data does NTRIP transmission consume?

Very small amounts of data are required to transmit the correction data in NTRIP format.

Which reference system does EPOSA use?

The EPOSA reference station network is based on the ITRF2020 coordinate system (epoch 2015.0).

ITRF stands for International Terrestrial Reference Frame.

You can also obtain your results (coordinates) in other systems—such as WGS84, Gauss-Krüger MGI, ETRS89, etc.—by using different mountpoints.

See: FAQ – Which mountpoint should I use?

Which mount point should I use?

The choice of mountpoint depends on the specific task, the device being used, and the required level of accuracy.

Mountpoints are divided into two groups:

1) Support for GPS/GLONASS/GALILEO/BDS - 4G:

RTK-32-4G: Raw RTK correction data
RTK-32-4G-TR: RTK correction data with integrated grid residuals
RTK-32-4G-TR-M34, RTK-32-4G-TR-M31, RTK-32-4G-TR-M28: RTK correction data + RTCM3 transformation messages
RTK-32-4G-ETRF: RTK correction data

2) Support for GPS/GLONASS - 2G:

RTK-3: Raw RTK correction data
RTK-3-TR: RTK correction data with integrated grid residuals
RTK-3-TR-M34, RTK-3-TR-M31, RTK-3-TR-M28: RTK correction data + RTCM3 transformation messages
RTK-3-ETRF: RTK correction data

What is RINEX data and is it offered by EPOSA?

RINEX data refers to recorded GNSS observation data from a reference station, a rover, or similar devices. This data is stored in individual ASCII files, formatted according to an internationally established standard known as the RINEX (Receiver Independent Exchange) format. Such data is required for various types of post-processing applications (e.g., determining the coordinates of new points through long-term observation, analyzing trajectories, etc.).

EPOSA provides its customers with RINEX data (versions 2 and 3) from all of its own reference stations, as well as so-called "virtual" RINEX data. Virtual RINEX data consists of GNSS observation data for a specific time period at any chosen location within the covered area (in the case of EPOSA: Austria). This virtual RINEX data is derived from archived error models—the same models used for real-time corrections.

Depending on the application, RINEX data can be obtained at various sampling rates, up to a maximum frequency of one observation per second. RINEX data from reference stations with a one-second sampling rate is available for six months; thereafter, it is thinned out to a 30-second interval. Virtual RINEX data with a one-second sampling rate can also be generated for a period of six months, after which the underlying correction models are deleted.